Basic Info.
The Minimuem Crimping Diameter Allowed
15
Power Transmission
Less or Equal 0.5kw
Rotational Speed
Approx.20000rpm
Timing Pulleys:From Teeth
=10
Applications
Precision Machine Drives, Film Camera Drive, Posit
Standard or Nonstandard
Standard
Application
Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Food Machinery, Marine, Mining Equipment, Agricultural Machinery
Feature
Flame-Retardant, Anti-Static, Oil-Resistant, Cold-Resistant, Corrosion-Resistant, Heat-Resistant, Alkali-Resistant, Skid-Resistance, Wear-Resistant, Acid-Resistant, High Temperature-Resistance
Transport Package
Export Standard
Product Description
T5-255 PU Timing Belt Steel Cords Power Transmission Belt Synchronous Belt Product Description
Quality and Services our Driving Force!
Polyurethane timing belts for mechanical drives and conveying applications. TimingBelts provide a simple, functional approch to solve your technical problems for driving systens and conveying of goods. The timing Belts within our product range are made from Polyurethane. The carcass construction in the Polyurethane belt isbased on Kevlar or Steel cords. The construction assures a high dynamic performance with low performance losses. Product Features
PRODUCTION PROCESS
Getreu polyurethane timing belts GETREU TIMING BELTS consist of 2 components, the wear-resistant Contilan, a polyurethane and a high quality steel cord tension member. The high power transmission capability results from the good booding of both materials. The moulding production process-cast extrusion- combines the following advantages. •The cast PU timing belt is an exact copy of its mould patten. High pitch precision across the entire belt is achieved. As a result, particularly suitable for conformal, smooth running and for high speeds. •Small length tolerance. Tolerance position canbe influenced by changing the winding tension, •Good bonding to the steel cord tension members due to the casting process and the capillary action. •High reproduction quality of the cast polyurethane. Exact development of fine contours possible. Particularly suitable for small pitches. DL tooth meshing and carrier cam on the back of the belt can be formed. •The timing belt coil removed from the mould has a total useable width depending on the moulld of up to 400 mm. GETREU POLYURETHANE TIMING BELTS are used in all areas of technology where synchronous transmission of a rotary movement is required. Thereby, it is independent of whether this is a power transmission, servo control functions or switching and conveying tasks. They operate in a speed range up to 20.000PRM. Mostly used application areas: •office machines •IT systems •textile machines •wood processing machines •machine tools •printing machines •pumps •compressors •construction machinery Product Models
Standard T profile with metric division and trapezoidal teeth. Designs avaialable for delivery: -toothed on one side(standard) -with aramid reinforcement fibres(tension support) -special polyurethane material on requst, antistatic, coloured, mechanically treated
| R.p.m. n[min-1] | Mspec [Ncm/cm] | Pspec [W/cm] | R.p.m. n[min-1] | Mspec [Ncm/cm] | Pspec [W/cm] | R.p.m. n[min-1] | Mspec [Ncm/cm] | Pspec [W/cm] | |
| 20 | 1.861 | 0.039 | 1300 | 1.198 | 1.632 | 3800 | 0.922 | 3.67 | |
| 40 | 1.819 | 0.076 | 1400 | 1.18 | 1.73 | 4000 | 0.909 | 3.81 | |
| 60 | 1.783 | 0.112 | 1500 | 1.162 | 1.826 | 4500 | 0.878 | 4.14 | |
| 80 | 1.751 | 0.147 | 1600 | 1.146 | 1.92 | 5000 | 0.85 | 4.45 | |
| 100 | 1.723 | 0.18 | 1700 | 1.131 | 2.01 | 5500 | 0.825 | 4.75 | |
| 200 | 1.614 | 0.338 | 1800 | 1.116 | 2.1 | 6000 | 0.802 | 5.04 | |
| 300 | 1.536 | 0.483 | 1900 | 1.102 | 2.19 | 6500 | 0.78 | 5.31 | |
| 400 | 1.476 | 0.618 | 200 | 1.089 | 2.28 | 7000 | 0.761 | 5.58 | |
| 500 | 1.427 | 0.747 | 2200 | 1.065 | 2.45 | 7500 | 0.742 | 5.83 | |
| 600 | 1.385 | 0.87 | 2400 | 1.042 | 2.62 | 8000 | 0.725 | 6.08 | |
| 700 | 1.349 | 0.989 | 2600 | 1.021 | 2.78 | 8500 | 0.709 | 6.31 | |
| 800 | 1.318 | 1.104 | 2800 | 1.002 | 2.94 | 9000 | 0.694 | 6.54 | |
| 900 | 1.298 | 1.215 | 3000 | 0.984 | 3.09 | 9500 | 0.679 | 6.76 | |
| 1000 | 1.263 | 1.323 | 3200 | 0.967 | 3.24 | 10000 | 0.666 | 6.97 | |
| 1100 | 1.24 | 1.428 | 3400 | 0.951 | 3.39 | | | | |
| Number of teeth | Length(mm) | | Number of teeth | Length(mm) | | Number of teeth | Length(mm) |
| 20 | 100 | | 78 | 390 | | 140 | 700 |
| 30 | 150 | | 80 | 400 | | 144 | 720 |
| 33 | 165 | | 82 | 410 | | 145 | 725 |
| 36 | 180 | | 84 | 420 | | 150 | 750 |
| 37 | 185 | | 91 | 455 | | 153 | 765 |
| 40 | 200 | | 92 | 460 | | 156 | 780 |
| 42 | 210 | | 96 | 480 | | 160 | 800 |
| 43 | 215 | | 100 | 500 | | 163 | 815 |
| 44 | 220 | | 101 | 505 | | 168 | 840 |
| 45 | 225 | | 102 | 510 | | 180 | 900 |
| 49 | 245 | | 105 | 525 | | 184 | 920 |
| 50 | 250 | | 109 | 545 | | 188 | 940 |
| 51 | 255 | | 110 | 550 | | 198 | 990 |
| 52 | 260 | | 112 | 560 | | 215 | 1075 |
| 54 | 270 | | 115 | 575 | | 220 | 1100 |
| 56 | 280 | | 118 | 590 | | 232 | 1160 |
| 59 | 295 | | 122 | 610 | | 243 | 1215 |
| 61 | 305 | | 124 | 620 | | 263 | 1315 |
| 66 | 330 | | 126 | 630 | | 276 | 1380 |
| 68 | 340 | | 130 | 650 | | 300 | 1500 |
| 71 | 355 | | 132 | 660 | | | |
| 73 | 365 | | 138 | 690 | | | |
| •Width Tolerance:±0.5[mm] | | | | |
| •Thickness Tolerance:±0.2[mm] | | | | |
.Switch off the power,remove the protective cap.loosen the assembly,move the motor to make the belt loose,you can take off the belt wrenching it up.
2.Take off the old belt,and then check if there is any abnormalwear and tear.Excessive wear and tear may indicate there are some problems with the design or maintenance of the gearing.
3.Choose the proper belt.
4.Clean the belt and the pulley using a cloth with some liquid which can't volatilize easily.It is not proper to soak it in the cleaning formulation or brush it with cleaning formulation or use the sand paper or sharp subject to scratch.The belt must be kept in dry condition.
5.Check the pulley if there is any abnormal wear and tear or crack,if the wear and tear is excessive,the pulley must be changed.
6.Check the pulley to see ifit is in symmetrical straight line,which is very important for the performance of the transmission,especially for the timing belt gearing.
7.Check the rest parts of the gearing,for example,the symmetry of the bearing and the bearing boot,durability and lubrication,etc.
8.When nstaling a new belt on the pully,it is forbidden to wrench or use too much force.
9.Ajdust and tighten the central distance of the gearing,until the tension is proper measured by the tension gauge.Use hand to rotate the driving pulley for several rounds and measures the tension again.
10.Tighten the assembly bolt of the motor,correct the torque,because nay change of the central distance well cause the bad property of the belt.Make sure all the gearings are tightened.
11.Switch the gearing on and observe the property of the belt if there is any unuaual vibration,listen carefully to see if there are any unusual noises.You'd better turn off the machine,then check the condition of bearing and motor,if the temperature is very high,may be because the belt is too tight or bearing is not symmetrical,or the lubrication is not correct.
Address:
B507 No. 57 Houting Industrial Area, Shajing Street, Baoan, 518104 China, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components
Management System Certification:
ISO 9001
Company Introduction:
Shenzhen Jiaheng Industrial Belting Co., Ltd is a manufacturing enterprise which professionally produces conveyor belts, timing belts, , transmission belts, V-belts in China. The coated cover of belts are PVC, Polyurethane, Rubber, PE, Hytrel Polyester, Silicone and etc. After several years of R&D, the upgraded new series products are more Polish, the varieties are growing in all-sided. Widely used in the industries of food process, tobacco, logistics and airport, printing, electronics, fitness equipment, wood process, stone and marble process, etc.
Currently company headquater locates in Shenzhen City, the most advanced city in South China, and has two factories locate in Zhejiang and Shanghai in the southeast of China which has 360 employees and covers an area of over 50, 000 square meters, with production workshop about 30, 000 square meters, a construction area of 10 0000 square meters. "Quality to survive, innovation and development" for the purpose, we has set up a "Products R&D Center", "Products Test", "Fabrication Workshop", "After-sales Service Center" and many other professional functional departments. From design to finished products have a range of professionals in the process. Because of our high quality products, attentive service and good reputation, our products are recognized by customers and counterparts around the world.
Based on more than 20 years of experience in development, manufacture and applications know-how, our products are designed to meet specific end-user requirements for high performance and cost-efficiency. We are ready with link "Win-Win" to has better future with our new and old customers.
){kind=link}